Innovative solutions for video editing, motion graphics, and post production.

Connect with Facebook

GEF-DVI-1044DL 10x4 DVI DL Matrix Free Shipping!

Mfr PN: GEF-DVI-1044DL
Our PN: GEFN9100091
Manufacturer: Gefen
Platform(s): Mac & Win

Enter email below:


Be the first to review this product

Quick Overview

Route any 10 DVI Dual Link Sources to any 4 DVI Dual Link Monitors



Manufacturer Part Number: GEF-DVI-1044DL

Simplify the process of routing up to ten DVI dual link sources to any of four DVI monitors without losing quality or resolution. The GefenPRO 10x4 DVI DL Matrix provides a simple, reliable, and highly effective method of streamlining any installation using multiple sources and outputs, taking the hassle out of managing multiple connections. Each source is accessible from any monitor by using the front-panel buttons, IR remote unit, built-in RS-232 or using IP control.

How It Works

The GefenPRO 10x4 DVI DL Matrix has ten DVI inputs and four DVI outputs. Using the supplied DVI dual link cables, connect ten sources to the DVI inputs on the GefenPRO 10x4 DVI DL Matrix. Connect the four dual link outputs on the GefenPRO 10x4 DVI DL Matrix to the DVI monitors. Plug in the power cord and power ON the 10x4 DVI DL Matrix. The connected monitors will show video according to the routing selection.

Note: The GefenPRO 10x4 DVI DL Matrix only supports DVI-D. The DVI connectors on the GefenPRO 10x4 DVI DL Matrix have all 29 pins.


  • Increases Productivity
  • Supports Resolutions up to 1920x1200 and 3840x2400 (dual-link)
  • Front Panel Control Buttons for local switching
  • IP Control
  • Serial RS-232 Interface for remote control via a computer or control automation device(s)
  • Discrete IR Remote Control
  • Advanced EDID management permits uploading of custom internal or external EDID settings
  • Supports DDWG standards for DVI
  • Internal Power Supply
  • Output Masking Command
  • Standby Mode
  • Energy Star Compliant
  • Grounding Pin
  • IR Sensor
  • IR Extender
  • Power On/Off Switch
  • Status LCD (shows routing status)
  • Firmware Upgrade via RS-232
  • Rack Mountable


  • Video Amplifier Bandwidth: 2x 165 MHz per channel
  • DVI Connector: DVI-I 29-pin (Digital only)
  • IP Control Connector : RJ-45
  • RS-232 serial port: DB-9 Female
  • IR Extender: 3.5mm Mini-Stereo jack
  • Built-in Power Supply: AC 110/220V (internal) IEC Connector
  • Power Consumption: 90 Watts (Max)
  • Input Video Signal: 1.2 Volts p-p
  • Dimensions: 17.25in W x 3.5in H x 11.8in D
  • Shipping Weight: 29 lbs

Included Items

  • (1) GefenPRO 10x4 DVI DL Matrix
  • (10) 6 foot dual-link DVI Cables (M-M)
  • (1) 6 foot Serial DB9 Cable (M-F)
  • (1) IR Remote Control Unit
  • (1) AC Power Cord
  • (1) User Manual


You're reviewing: GEF-DVI-1044DL 10x4 DVI DL Matrix

Compare Products

You have no items to compare.