Innovative solutions for video editing, motion graphics, and post production.

Connect with Facebook
 

GEF-HDCAT5-ELRPOL Extender for HDMI ELR with PoL over CAT5 Free Shipping!

Mfr PN: GEF-HDCAT5-ELRPOL
Our PN: GEFN9100142
Manufacturer: Gefen
Platform(s): Mac & Win

$1,999.00
Enter email below:

OR

Be the first to review this product

Quick Overview

The GefenPRO Extender for HDMI ELR with PoL over CAT5 extends a HDMI source with 1080p Full HD video and high-resolution multi channel audio up 330 feet (100 meters) using a single CAT-5e cable. The receiver unit also has the ability to power a separate 5V DC device at up to 2 amps using power transmitted over the CAT-5 cable. This product also extends Ethernet, and provides an IR back channel to allow control of remotely located AV sources from the display location, all through the same single CAT-5. DVI-D is also supported through the use of a HDMI to DVI adapter, providing greater flexibility when integrating various types of sources and displays.

Description

Details

Manufacturer Part Number: GEF-HDCAT5-ELRPOL

The GefenPRO Extender for HDMI ELR with PoL over CAT5 system consists of Sender and Receiver units. The Sender is located next to the HDMI source, and the Receiver is installed near the remote HDMI display. The source and the Sender are connected with the included 6 foot HDMI cable, and the Receiver and the Display are connected with a user supplied cable. A single CAT-5e cable of up to 330 feet (100 meters) in length links the Sender and Receiver units. The Ethernet ports on both the Sender and Receiver units are connected to standard network devices such as 100Base-T routers and hubs, and can also be connected to Ethernet equipped sources and displays. The Sender unit is powered by an internal power supply and provides power to the Receiver over the CAT-5e cable. An additional 5V/2A DC Gefen device can be powered from the receiver using the optional power cable listed below. In addition, IR commands can be relayed from the display location to the source component(s) with the optional Gefen IR accessories listed on the left-hand side of the page. Note: * Power over Line (PoL) is a Gefen proprietary technology that provides 10W of 5 Volt DC power to the Receiver Unit over the single CAT-5 signal cable, and allows the Receiver Unit to power additional Gefen devices.

It is based on the Power over Ethernet (PoE) Standards, but is specifically tailored to Gefen's Hi-Def video products.

  • Extends HDMI and Ethernet at up to 330 feet (100 meters) over one CAT-5e cable
  • Supports resolutions up to Ultra HD 4K x 2K (3840 x 2160 @ 30Hz) and 1080P Full HD
  • Supported HDMI features:
    • HDCP-compliant
    • 12-bit Deep Color
    • LPCM 7.1 audio, Dolby TrueHD, Dolby Digital Plus, and DTS-HD Master Audio pass-through
    • 3DTV pass-through
    • CEC pass-through
    • Lip Sync pass-through
  • Power over Line: Using Gefen POL technology, the Receiver unit is powered from the CAT-5 cable, and offers one +5V 2A output to power additional devices
  • IR back-channel to control any source equipment from the remote location
  • RS-232 port for automation
  • ELR and HDBaseT technologies allow extension up to 330 feet (100 meters)
  • Extends 100BaseT Ethernet to the remote location
  • Internal power supply at the Sender unit
  • +5V output with locking connector at the Receiver unit
  • Rack-mountable (using Gefen EXT-RACK-1U)

Specifications

  • Maximum Pixel Clock: 300MHz
  • Maximum TMDS Clock: 300MHz
  • Video Input Connector (Sender): (1) HDMI Type A 19-pin, female
  • Video Output Connector (Receiver): (1) HDMI Type A 19-pin, female
  • RS-232 Connector (Sender): DB-9, female
  • RS-232 Connector (Receiver): DB-9, male
  • Ethernet Connector (Sender / Receiver): RJ-45, Shielded
  • Link Connector (Sender / Receiver): RJ-45, Shielded
  • IR Extender Input (Receiver): 3.5 mm mini-stereo jack
  • IR Extender Type (Receiver): EXT-RMT-EXTIR (available separately)
  • IR Emitter Output (Sender): (1) 3.5 mm mini-mono jack
  • Power Supply (Sender): 100 - 240V AC (Internal)
  • Power Input Connector (Sender): IEC inlet with fuse-holder and power switch
  • Power Indicator (Receiver) : LED, Red
  • Operating Temperature: 32 F to +113 F (0 C to +45 C)
  • Storage Temperature: -4 F to +140 F (-20 C to +60 C)
  • Humidity: 20% to 90%RH, no condensation
  • Dimensions (Sender / Receiver) (W x H x D): 8.3in x 1.7in x 6.7in (210mm x 43mm x 170mm)
  • Shipping Weight: 8 lbs (3.6 kg)

Included Items

  • (1) Extender for HDMI ELR PoL over CAT5 - Sender unit (GEF-HDCAT5-ELRPOL-S)
  • (1) Extender for HDMI ELR with PoL over CAT5 - Receiver unit (GEF-HDCAT5-ELRPOL-R)
  • (1) 6 ft. HDMI locking cable (M-M) (CAB-HD-LCK-06Mm)
  • (1) 6 ft. DB9 serial cable (M-F) (CAB-DB9-6MF)
  • (1) AC Power Cord (CAB-POWERCORD-XX)
  • (1) Quick-Start Guide (QSG-GEF-HDCAT5-ELRPOL)
  • (2) Rack Ears (EXT-RACK-8.5-BLK)

Review

You're reviewing: GEF-HDCAT5-ELRPOL Extender for HDMI ELR with PoL over CAT5

Compare Products

You have no items to compare.

PAYMENT METHOD