Innovative solutions for video editing, motion graphics, and post production.

Connect with Facebook
 

GEF-HDCAT5-ELRPOL2 Extender for HDMI ELR PoL 2 over CAT5 Free Shipping!

Mfr PN: GEF-HDCAT5-ELRPOL2
Our PN: GEFN9100143
Manufacturer: Gefen
Platform(s): Mac & Win

$2,099.00
Enter email below:

OR

Be the first to review this product

Quick Overview

The GefenPRO Extender for HDMI ELR PoL 2 over CAT5 includes all of the features of the GefenPRO Extender for HDMI ELR with PoL and adds active source switching with an additional HDMI input on the receiver unit. This feature adds the ability to switch between a HDMI source connected to the sender unit and a second local HDMI source connected directly to the receiver unit. The GefenPRO Extender for HDMI ELR PoL 2 over CAT5 can extend HDMI with 3DTV support and all of the features of HDMI 1.3 including 1080p Full HD, Deep Color and high-resolution multichannel audio up to 330 feet (100 meter) over just a single CAT-5E cable.

Description

Details

Manufacturer Part Number: GEF-HDCAT5-ELRPOL2

In addition, Gefen's PoL (Power over Link) technology gives it the capability to power an additional 5V DC device, up to 3 Amps, at the Receiver unit over the CAT-5 cable.

This product also supports DVI-D when used with a HDMI to DVI adapter, providing greater flexibility when integrating various types of sources and displays.

The Extender for HDMI ELR PoL 2 over CAT5 extends Ethernet and provides an RS-232 and IR back channel to control A/V sources using the same CAT-5 cable extension. With the built-in IR Blaster, simply point the IR remote(s) at the display to control the source component(s) as if they were located in the same room as the display.

The GefenPRO Extender for HDMI ELR PoL 2 over CAT5 Sender unit is connected to the source with the included HDMI cable. The Receiver unit is connected to the display and to the optional local HDMI source with user supplied cables. A single CAT-5E cable of up to 330 feet (100 meters) in length links the sender and receiver units. The sender unit is powered by an internal power supply, and the Receiver unit receives power from the Sender over the CAT-5E cable.

The Ethernet ports of both the Sender and Receiver units are connected to standard network devices such as routers and hubs, or can be connected to Ethernet equipped sources and displays. Optional Gefen IR accessories can be connected to provide IR control of source devices from the display location.

To use the source switching feature, simply power on the local HDMI source that is directly connected to the Receiver and the unit will automatically switch to that source. To revert to the source connected to the Sender unit, simply power down the source connected to the Receiver unit.

To power and additional 5V Gefen device from the Receiver, order the optional cable listed below.


Supported HDMI Features:

  • Ultra HD 4K x 2K
  • 1080p Full HD
  • 12 bit Deep Color
  • LPCM 7.1 Audio, Dolby TrueHD, and DTS-HD Master Audio
  • 3DTV Pass-through
  • CEC Pass-through
  • Lip Sync Pass-through

Note: * Power over Line (PoL) is a Gefen proprietary technology that provides 10W of 5 Volt DC power to the GefenPRO Extender for HDMI ELR PoL 2 over CAT5 Receiver Unit over the single CAT-5 signal cable, and allows the Receiver Unit to power additional Gefen devices.

It is based on the Power over Ethernet (PoE) Standards, but is specifically tailored to Gefen's Hi-Def video products.

  • Extends HDMI at up to 330 feet (100 meters) over one CAT-5E cable
  • Supports resolutions up to Ultra HD 4K x 2K (3840 x 2160 @ 30Hz) and 1080P Full HD
  • Supported HDMI features:
    • HDCP-compliant
    • 12-bit Deep Color
    • LPCM 7.1 audio, Dolby TrueHD, Dolby Digital Plus, and DTS-HD Master Audio pass-through
    • 3DTV pass-through
    • CEC pass-through
    • Lip Sync pass-through
  • Power over Line: Using Gefen PoL technology, the Receiver unit is powered from the CAT-5 cable, and offers one +5V 3A output to power additional devices
  • HDMI input on the Receiver side allows connection of an additional source at the remote location
  • Auto-switching: The Receiver unit auto-switches between the active HDMI source connected to the Sender or additional HDMI devices connected to the Receiver unit
  • Manual switching of the Hi-Def sources using an optional IR remote, local push button, or RS-232
  • IR back-channel to control any source equipment from the remote location
  • RS-232 port for automation
  • ELR and HDBaseT technologies allow extension up to 330 feet (100 meters)
  • Extends 100BaseT Ethernet to the remote location
  • Internal power supply at the Sender unit
  • +5V output with locking connector at the Receiver unit
  • Rack-mountable (using Gefen EXT-RACK-1U)

Specifications

  • Maximum Pixel Clock: 300MHz
  • Maximum TMDS Clock: 300MHz
  • Video Input Connector (Sender): (1) HDMI Type A 19-pin, female
  • Video Output Connector (Receiver): (1) HDMI Type A 19-pin, female
  • Local Video Input Connector (Receiver): (1) HDMI Type A 19-pin, female
  • RS-232 Connector (Sender): DB-9, female
  • RS-232 Connector (Receiver): DB-9, male
  • Ethernet Connector (Sender / Receiver): RJ-45, Shielded
  • Link Connector (Sender / Receiver): RJ-45, Shielded
  • IR Extender Input (Receiver): 3.5 mm mini-stereo jack
  • IR Extender Type (Receiver): EXT-RMT-EXTIR (available separately)
  • IR Emitter Output (Sender): (1) 3.5 mm mini-mono jack
  • Power Supply (Sender): 100 - 240V AC (Internal)
  • Power Input Connector (Sender): IEC inlet with fuse-holder and power switch
  • Power Indicator (Receiver) : LED, Red
  • Operating Temperature: 32 F to +113 F (0 C to +45 C)
  • Storage Temperature: -4 F to +140 F (-20 C to +60 C)
  • Humidity: 20% to 90%RH, no condensation
  • Dimensions (Sender / Receiver) (W x H x D): 8.3in x 1.7in x 6.7in (210mm x 43mm x 170mm)
  • Shipping Weight: 8 lbs (3.6 kg)

Included Items

  • (1) Extender for HDMI ELR PoL over CAT5 - Sender unit (GEF-HDCAT5-ELRPOL-S)
  • (1) Extender for HDMI ELR with PoL over CAT5 - Receiver unit (GEF-HDCAT5-ELRPOL-2R)
  • (1) 6 ft. HDMI locking cable (M-M) (CAB-HD-LCK-06Mm)
  • (1) 6 ft. DB9 serial cable (M-F) (CAB-DB9-6MF)
  • (1) AC Power Cord (CAB-POWERCORD-XX)
  • (1) Quick-Start Guide (QSG-GEF-HDCAT5-ELRPOL2)
  • (2) Rack Ears (EXT-RACK-8.5-BLK)

Review

You're reviewing: GEF-HDCAT5-ELRPOL2 Extender for HDMI ELR PoL 2 over CAT5

Compare Products

You have no items to compare.

PAYMENT METHOD