| For HD-SDI inputs, the HD10C2 outputs full bandwidth HD component or VGA-style RGBHV video. For SDI inputs, component or composite SD outputs are supported. When connected to a multi-format monitor like the Sony 20L5, the HD10C2 will automatically provide an image from almost any HD or SD input format. The HD10C2 also features 2 equalized HD-SDI outputs. Features
- Low Cost, High Quality, 10-bit Dual Rate HD/SD D/A Conversion
- Full Bandwidth HD Analog RGB or YPbPr Output (HD input)
- Component/Composite SD Output (SD input)
- 2 Equalized Loop-Thru HD-SDI/SDI Outputs
- RGBHV VGA style HD output using supplied adapter
- HD Sync Selectable Between Bi-level and Tri-Level
- 4:3 Safe Area Graticule (HD)
- 5-18VDC Power
- External Dipswitch Configuration
Specifications - Formats
- HD: 1080i @ 50/59.94/60 Hz
- 1035i @ 50/50.94/60 Hz
- 1080psf @ 23.98/24/25/29.97/30 (displayed as Interlaced)
- 720p @ 59.94/60 Hz
- SD: 525 59.94Hz, 625 50Hz
- Automatic Configuration
- Inputs
- HD-SDI or SDI SMPTE 259/292/296, 10-bit, BNC
- Input Equalization: 125 Meter 1694 Cable
- Outputs
- HD: YPbPr, RGB (SMPTE-274)
- SD: YPbPr (SMPTE/N10, BetaŽ RGB, Y/C, NTSC/PAL)
- 13W3 wideband analog output connector (cable supplied)
- HD-SDI/SDI equalized loop-thru, 2 x BNC
- Sync
- HD: Tri-level or Bi-level, H/V Drive
- SD: normal SD sync
- Frequency Response
- HD: Y +0, -.5db to 30 MHz, C +/.25db to 13 MHz
- SD: Y +/.25db to 5.5 MHz, C +/.25db to 2.5 MHz
- User Controls
- External Dipswitch
- YPbPr/RGB
- Component/Composite (SD)
- SD Pedestal
- SD Blanking
- HD 4:3 Graticule
- SD NTSC/NTSC-J
- Sync on Video on/off
- Power
- +5-18VDC Regulated, 4 Watts
- This item requires the DWP D-series Power Supply, sold separately
- Size
- 5.8" x 3.1" x 1" (147 x 79 x 25mm)
|
HD10C2 HD-SDI and SDI digital-to-analog converter 10-bit
CATEGORY: 
Mac & 
Win 
Write a review!
Copyright © 2008 by Safe Harbor Computers. All Rights Reserved. No content from this site may be reproduced or publicly reposted without express written permission.
