D10CEA SDI to analog audio and video converter

Manufacturer Part Number: D10CEA

DESCRIPTION
The video outputs can be configured as YPbPr (Betacam or SMPTE/EBU-N10), RGB, composite or YC (S-Video). The analog audio outputs can be wired in a balanced or unbalanced configuration. The 4 audio channels can be selected from group 1-4. Audio and video output connections are available on a 25 pin "D" subminiature connector (breakout cable supplied). All video/audio configuration is done by external dipswitch selection. This versatile, low-cost, miniature monitoring solution also outputs two re-clocked loop-thru SDI outputs.

Please note: This item requires the DWP D-series Power Supply, sold separately.

Features

• Digital to Analog Audio and Video Converter
• SDI with Embedded Audio Input
• Component or Composite Video Outputs
• 4 Channel Balanced Audio Output
• 2 Re-Clocked, Loop-Thru SDI Outputs
• Selectable Audio Channel Pair/Group

SPECIFICATIONS

• Inputs:
  • SDI (SMPTE 259M) w/Embedded Audio, 1x BNC
• Outputs:
  • Video: YPbPr SMPTE, EBU-N10, Betacam, RGB, NTSC, PAL, YC (S-Video)
  • Audio: 4 Channel Balanced/Unbalanced
  • Video/Audio Outputs on 25 Pin D Connector
  • 2 SDI Re-Clocked Loop-Thru, 2x BNC
• Frequency Response:
  • Video, +/.25dB to 5Mhz, Audio, +/.5dB to 20Khz
• User Controls:
  • External Dipswitch
  • Video Format
  • Pedestal
  • H/V Blanking
  • Audio Group 1 4
  • Audio Level, -14, 0, +2, +4 dBu
• Power:
  • 5VDC Regulated, 4 Watts
    • This item requires the DWP D-series Power Supply, sold separately.
• Size:
  • 5.8in x 3.1in x 1in (147 x 79 x 25mm)