    |  |    |
| ExpressPCI UL4D SCSI Host Adapter Dual-channel Ultra320-to-PCI-X SCSI Host Adapter for the Ultimate Data-Delivery Performance
|  | |||||||||||
 CATEGORY: | Harddrive Controllers |  | PARTNUMBER: | ATON5250002 |
| | |||
| MANUFACTURER: | ATTO Technology | PLATFORM(S): |  Mac &  Win | |
| | |||
| ON THE WEB: | www.attotech.com | AVAILABILITY: | Usually ships in 2-business days or less. | |
| | |||
| AVERAGE RATING: | Not rated yet!  Write a review! | DELIVERY: | Packaged | |
| | |||
| ExpressPCI UL4D SCSI Host Adapter Specifications |
| The UL4D dual-channel Ultra320 adapter is the latest addition to the ATTO ExpressPCI family of high-performance SCSI host adapters for data-intensive environments. This latest generation adapter boasts data-transfer rates up to 640 MB/sec. and offers support for the advanced PCI-X bus. It is an ideal fit for Enterprise servers and high-end workstations running high volume, mission-critical applications such as messaging and databases. Features:
Today's computing applications continue to place incredible strain on the host PCI bus and storage subsystem. In an ongoing effort to bring new heights of performance and reliability to today's professional applications, ATTO is pleased to introduce the ATTO ExpressPCI UL4D with PCI-X ... alleviating PCI bus bottlenecks. Leveraging this latest in SCSI storage connectivity, the UL4D delivers up to 640 MB/sec. data throughput - making it twice as fast as currently available SCSI host adapters. The UL4D's blazing fast speed, plus the advantage of the new PCI-X bus interface and improvements in the SCSI standard, enable it to deliver the high bandwidth required in data-intensive environments. Benefits:
|
| ExpressPCI UL4D SCSI Host Adapter Frequently-Asked Questions |
1. HOW DO I TERMINATE A SCSI BUS? When a SCSI controller issues a command to one of the devices on the SCSI bus, it does not expect to have that command come back to it. Instead, it expects to hear just the response from the drive it issued a command to. Properly terminating the SCSI bus prevents signal reflection on the cables, essentially absorbing commands when they reach the end of the cable. On an improperly terminated SCSI bus, it is common to have the controller software issue error messages caused by unexpected activities on the bus or to experience complete failure of the bus. The "golden" rule for SCSI termination is that each end of a SCSI bus must be terminated and no terminator can exist anywhere in between these ends. When you add or remove drives from a SCSI bus, you must comply with this rule. Each SCSI bus starts with a controller. The controller is terminated. Even if there are no drives attached to it, the controller can still issue commands to search for drives without having those commands reflect. Typically, you will add at least one SCSI drive to the bus. You will do so by connecting a ribbon cable from the controller to the drive. Note that one end of the ribbon must plug into the controller and the other end must plug into the drive. In this case, the drive must also be terminated so that both ends of the bus are terminated according to the rule! If you then add additional drives, you can install the drives anywhere along the cable, providing only the drive on the end is terminated. The termination rule gets complicated when you try to add both internal and external SCSI drives to a system. Since the rule states that the ends of the SCSI bus must be terminated, obviously the drive connected to the end of the internal cable must be terminated and the drive connected to the end of the external cable must be terminated. Unfortunately, this leaves the controller somewhere in the middle of the bus and it too is terminated. If the controller does not provide automatic termination enable/disable, you must manually disable termination on the SCSI controller. Note that termination violations might sometimes appear to work. However, it is better to be safe than sorry. Follow the rule! Terminating a drive usually involves installing or removing a jumper on the drive. Check your drive manual for this jumper setting. If the drive does not provide built-in termination, you can purchase a stand-alone terminator. Terminators are available to plug into most SCSI connectors and come in a whole host of shapes and sizes so get the one designed for your application. Note that most new SCSI drives do not provide a built-in terminator and termination is provide by a separate terminator plugged into the end of the SCSI cable.
|
| May We Take Your Order, Please? |
| Ordering from Safe Harbor is safe and easy. We offer a variety of ways to order including securely through this website or over the phone, toll-free. Our customers are always pleased with our top-rated customer service, fast shipping and competitive prices. Safe Harbor appreciates your business! May we please take your order for an ExpressPCI UL4D SCSI Host Adapter today?
| 
 |
| Related Resources on Safe Harbor's Website |
| ||||||||||||||||
|
Home | Workstations | Products | Manufacturers | Your Cart | Order Status | Help | Contact Us
 Copyright © 2008 by Safe Harbor Computers. All Rights Reserved. No content from this site may be reproduced or publicly reposted without express written permission.All product content herein remains the licensed property of their respective distributers and manufacturers. | | Questions regarding products or orders can be emailed to: sales@sharbor.com | | Every effort has been made to ensure the accuracy of the information represented on this site. Prices and specifications subject to change without notice. Not responsible for typos. Explore our site without worry - read our privacy statement. Website questions or comments? webmaster@sharbor.com |
 |  |