Manufacturer Part Number: SWATEM1ME DESCRIPTION
Newly Added Features - Uncompressed capture via USB 3.0 with ATEM 1M/E Production Switcher
- UltraScope monitoring via USB 3.0 with ATEM 1M/E Production Switcher
NEW in v3.2
Now all ATEM switcher models include a built-in audio mixer that uses embedded HDMI and SDI audio from cameras, media servers decks and other inputs. The ATEM Switcher 3.2 audio mixer software also enables audio mixing from external audio sources via dedicated audio ports. External audio is mixed for ATEM Television Studio from the AES/EBU input, and on ATEM 1 M/E and ATEM 2 M/E Production Switcher models audio from the audio breakout cable. On ATEM 1 M/E and ATEM 2 M/E models, the audio mixer can also mix audio from the two built in media players, and it contains independent controls for setting the audio level and selecting SOLO audio monitoring. Once SDI and HDMI cameras are connected to the switcher for vision mixing, the audio mixer uses the embedded audio in the video signal, and requires no further connections or routing through an external unit. Because both products do not rely on audio mixing desks, ATEM 1 M/E Production Switcher and ATEM Television Studio are useful on location in fly away kits or in small spaces in broadcast trucks. The software interface provides level and balance control for each input, and audio can be set either to follow video or perform a direct mix. Audio-follow-video, AFV, allows audio to crossfade when the inputs change, while direct mix allows an input to be permanently mixed into the program output independent of the current active input. On the ATEM 1 M/E and ATEM 2 M/E Production Switcher models the audio output can be used as a dedicated monitor output by selecting SOLO. This outputs the single source audio to the monitor output only so users can listen and confirm audio content before sending to air, without affecting the program output audio. RECAP - The ATEM 1 M/E Production Switcher and the ATEM TV Studio now have an audio mixer, sourced from audio embedded on all SDI/HDMI Inputs, the Media Players and the analog Audio-In on the breakout cable for the 1 M/E and the AES/EBU input on the TV Studio.
- Audio mixer monitoring can be enabled on the analog Audio-Out on the breakout cable on the 1 M/E only. The default for the Audio-Out is Program audio.
FEATURES The most advanced broadcast grade production switchers!
Introducing the world's most advanced broadcast grade production switchers! ATEM switchers include advanced technology and unique, powerful features, all built into a familiar M/E setup that's fast and easy to use. With an advanced broadcast SDI based design, ATEM also includes loads of HDMI connections for connecting low cost HDMI consumer cameras! Now you can get started with live production, the world's lowest cost and fastest way to produce professional video content! From $2,495 Built to Perform
ATEM uses a familiar M/E style of operation so you get an instantly familiar workflow that's fast and easy to use. ATEM is affordably priced because you can start with the chassis only with software based control panel for Mac and Windows! If you then need a complete solution, simply add the ATEM 1 M/E or 2 M/E Broadcast Panel depending on your budget! The ATEM is a true broadcast grade panel with premium quality switches, faders and joysticks that are normally only found on the most expensive switchers available. ATEM even uses an FAA certified operating system for a true broadcast grade switcher! Premium Quality
For the highest quality video with extremely low processing delay, ATEM features a fully digital 10-bit design. This means you get the highest quality available from cameras, servers and character generators with true 10-bit video quality maintained throughout the entire signal path. Get better chroma keying and seamless layering from HDMI and SDI sources so all your video maintains that pristine broadcast quality look. Even ATEM's built in analog video inputs and outputs feature low noise AD converters for incredible analog quality! Creative Power
ATEM is the most creative solution for live switching! All transitions are instantly available with a button push on the control panel and include the same cut, mix and wipe found on traditional mixers! Plus you also get extra innovative ATEM transitions including dip, DVE, graphic wipe and stinger! It's simple to load clips into the 2 built in media players for exciting custom animated graphic transitions. ATEM features a built in DVE with 3D borders, light source and drop shadow! You can even use the DVE for transitions, or route into any of the 4 built in keyers for incredible multi-layer compositions! Incredible Features
Only ATEM includes all these broadcast features at an affordable price! You get 4 upstream keyers, each with independent chroma, pattern, shaped and linear keying. You also get 2 downstream keyers and independent fade to black. Add unprecedented creativity with graphic wipes and stinger transitions using the 2 built in media players. For the ultimate in professional live production you can use the built in DVE for amazing DVE transitions or key repositioning! When you're on the move, the built in multi-view monitoring totally eliminates monitoring costs because all cameras, preview and program can be viewed on a single SDI or HDMI monitor! Nothing beats ATEM for creative features, quality and affordability! New Software Control!
For the ultimate in portability, every ATEM production switcher includes beautifully designed control panel software for Mac and Windows, so you can even use your switcher from your laptop! ATEM software control provides a professional M/E workflow control panel with parameter adjustments in simple to use palettes. You can manage the switcher media pool and set all adjustments, and switcher control includes full keyboard shortcuts! Only ATEM lets you start at a lower cost because you’re not forced to buy a hardware control panel! Built in USB 3.0 Capture and Scopes!
With USB 3.0 becoming more popular on Windows computers, ATEM includes support for USB 3.0 capture direct to your PC! Get the most incredible quality 10-bit captures in full HD resolution for a direct file based master of your production. Because USB capture is connected to Aux 1, you can capture program or even clean feeds of your programming. ATEM includes our Media Express software for easy capture to AVI or DPX files. If you need high quality waveform monitoring, then ATEM also includes Blackmagic Design UltraScope software so you can use the USB connection for incredible PC based scopes! Great Range of Switchers
Choose an ATEM model for features you need and your budget! The ATEM 1 M/E model gives you 8 video inputs, 3 Aux outputs, SDI, HDMI and analog program outputs, SDI and HDMI multi view outputs, USB 3.0 as well as down converted SDI and composite outputs. Get the 2 M/E model for all these great features with SuperSource™, 16 inputs and 6 Aux outputs! WORKFLOW Everything you need for live production!
Live production demands error free operation and the features you need for incredible production values. ATEM switchers include powerful creative tools such as DVE, upstream keyers, media pool, Photoshop™ plugin, preview transition and more! With ATEM you get the features you need for an incredible live production that will amaze your audience! Built in Multi View
Save thousands of dollars on costly camera monitoring with ATEM's built in multi-viewer. Multi-viewer allows 10 channels of video to be displayed on a single SDI or HDMI television or monitor. Views are fully routable so you can select any external video source or any internal video source such as media players, color generators, auxiliary outputs, clean feeds and more! You can change the multi-view layout, as well as customize the labels and set safe area markers on the preview display. Multi-view includes tally so on-air sources have red borders and preview sources have green borders. No other switcher is more portable than ATEM because you only need the ATEM chassis, laptop and a single television for a complete multi-camera production environment! More Connections
ATEM is a professional broadcast SDI switcher that also includes loads of HDMI connections so you can start affordably with consumer HDMI cameras then move up to SDI cameras as your budget grows! Unlike other switchers, every video input features an automatic frame re-synchronizer, so you can plug in any device and it always works! Imagine getting started with incredible multi-camera production using the latest low cost and high quality HD consumer cameras! ATEM is perfect at locations where you need to adapt to the environment because it includes SDI, HDMI, and component/composite inputs and outputs. You can send live program output to anyone who needs it because ATEM includes 6 program outputs in HD-SDI, HDMI, HD component and USB 3.0, as well as permanently down converted SD-SDI and composite video. All ATEM models include built in black, bars, media player and color generator sources. The ATEM multi-viewer includes both SDI and HDMI outputs, plus you get 3 Aux outputs for connecting to stage screens and venue monitoring. The ATEM 1 M/E model includes a total of 8 inputs with 4 HDMI, 1 component/composite, and 4 SDI/HD-SDI connections. If you need even more inputs, the ATEM 2 M/E model features extra SDI connections for a total of 16 inputs, as well as 6 Aux outputs, and support for 2 independent multi-viewers! Preview Transition
When you're in the middle of a busy live production, the last thing you need is to make a mistake! ATEM includes a transition preview function that's as easy to use as pushing the Preview Transition button! The preview transition button lets you see how the transition will look on the preview output of the switcher. Now you can see the effect before it goes on air! Adobe Photoshop Plug-in
For incredible character and title generation, every ATEM includes a Photoshop plug-in that lets you instantly download graphics and titles from Photoshop directly into the ATEM media pool. Imagine the moment a live event happens, you can update your Photoshop file and instantly download it into the ATEM media player. Now you can get titles on air in seconds! Because Photoshop is the standard tool for millions of graphic designers, it's easy to get help to create your own custom graphics! ATEM also supports rendered stills and clip sequences from Photoshop, After Effects, Final Cut Pro, Premiere Pro and many more! SOFTWARE Introducing the ATEM Software Control Panel!
For the ultimate in portability, every ATEM production switcher includes beautifully designed control panel software for Mac and Windows, so you can even use your switcher from your laptop! ATEM software control provides a professional M/E workflow control panel with parameter adjustments in simple to use palettes. You can manage the switcher media pool and set all adjustments, and switcher control includes full keyboard shortcuts! Only ATEM lets you start at a lower cost because you’re not forced to buy a hardware control panel! 
|
SuperSource Multi-layering
Add multi-box compositions quickly and easily with ATEM SuperSource! Available on the 2 M/E Production Switcher model, you get a completely separate 5 layer switcher with the power of 4 picture in picture DVEs and 4 keyers connected as an ATEM video input! Position, resize and key up to 4 video sources to create compositions that would normally require a multi M/E switcher! Use SuperSource for multi camera interviews or picture in picture production while leaving all your M/Es, keyers and DVE completely free for other tasks. SuperSource compositions can also be quickly saved and recalled in an instant! 8 Simultaneous Layers!
Only ATEM includes a massive 8 layers in such an affordable broadcast grade switcher! With so many simultaneous layers, the compact 1 M/E ATEM packs all this power into a tiny 2 rack unit size so it's perfect for portable use! You get 4 fully independent upstream keyers with full chroma key and pattern generators! If you want even more layers, the ATEM 2 M/E Product Switcher features a whole second M/E row and the powerful SuperSource for even more layers for greater control over complex live production. Stinger Effects
With ATEM you get a truly professional switcher that's got all the features you need for live broadcast production. ATEM includes stinger transitions for animated transitions and graphic wipes, and because there is a separate keyer for stingers, all your upstream and downstream keyers are completely free for other use! Stingers also include sound effects so you can create exciting custom transitions only limited by your creativity! You can customize the transition point so you get seamless stinger effects, plus the animation in the media player is automatically triggered so you get perfect results every time! High Quality DVE
ATEM includes a premium quality DVE that's perfect for DVE transitions or repositioning elements into the ATEM keyers. The built in ATEM DVE features the highest quality filtering combined with antialiased key channel for true broadcast quality. For full control, the DVE also features x and y position, size and rotation controls, with customizable 3D borders with color and softness settings. DVE light source is also included with customizable softness for amazing looking drop shadows. The DVE can also be used for high quality push, squeeze and move animation, giving you the perfect solution for DVE transitions! Built in Media Players
ATEM includes two built in media players so you free up switcher video inputs plus save thousands of dollars by eliminating external character generators and servers! Because media players are built into ATEM, you get a fantastic portable solution! Media players include a massive 2 GB of memory for 32 stills, and 2 live clips support both fill and key channels. Media players are great for animated logos, backgrounds, lower thirds, bugs, stinger transitions and more! You can route media players into any switcher input, upstream keyer, downstream keyer, background or into the transition block for stinger transitions! View the ATEM Switcher/Panel models here - http://www.decklink.com/products/atem/models/ View the ATEM Switcher/Panel specifications here - http://www.decklink.com/products/atem/techspecs/ REQUIREMENTS
- Windows
- Microsoft Windows 7 32-bit or Microsoft Windows 7 64-bit
- Apple QuickTime™ for H.264 capture with ATEM Television Studio
- Computer display resolution of at least 1366 by 768.
- A USB 2.0 or 3.0 port for H.264 capture from an ATEM Television Studio.
- A USB 3.0 port for uncompressed capture from an ATEM 1M/E or 2 M/E Production Switcher.
- The same USB 2.0 or 3.0 port is used for internal software updates.
- An Ethernet connection for switcher control.
- Mac
- Mac OS X 10.7.4 Lion or OS X 10.8 Mountain Lion.
- Display resolution of at least 1366 by 768 or larger.
- A USB 2.0 port for software updates.
- The same USB 2.0 port is used for H.264 capture from an ATEM Television Studio.
- An Ethernet connection for switcher control.
| 
status 
Cart 
Category: 
Mac & 
Win 
Write a review!
