Innovative solutions for video editing, motion graphics, and post production.

Connect with Facebook
 

USB Capture DVI Plus Free Shipping!

USB Capture DVI Plus

More Views

Mfr PN: 32080
Our PN: MWLN5010026
Manufacturer: Magewell
Platform(s): Mac & Win

Availability: Usually ships in 2-business days or less.

$419.00
Enter email below:

Similar to USB Capture DVI Plus...

Product NamePrice
USB Capture AIO$619.00

OR

Be the first to review this product

Quick Overview

USB 3.0 DONGLE, 1-channel DVI. /DVI / VGA / YPbPr / CVBS with loop-through out, plus extra audio mic in / out. Driver-FREE. W/L/M. 3-year warranty.

Description

Details

Manufacturer Part Number: 32080

Input Interfaces

Auto scan of video input sources when there is no signal input to the currently selected input source
Manual selection of video input source
Auto selection of linked (embedded) audio input source when the video input source changes
Manual selection of audio input source
Support for input video resolutions up to 20482160

VGA and Component Specific Features

12-bit ADC
Support for RGB and YCbCr (YUV) color formats
Support for Seperated sync, Composite sync, Sync-on-green (SOG), Sync-on-luminance (SOY)
Support for DMT, CEA, CVT, GTF video timings
Input signals up to 165MHz pixel rate are digitized with 1:1 sampling
Input signals over 165MHz pixel rate can be digitized with horizontal sub-sampling (resulting in some image quality loss NOT recommended)
Auto detection of RGB and YCbCr color formats
Auto or manual sampling phase adjustment
Auto horizontal alignment
Support for customized video timings
Support for customized video resolutions for CVT/GTF timings

HDMI Specific Features

225MHz HDMI receiver
Adaptive HDMI equalizer support for cables lengths up to 30M
Support for customized EDID
Support for extraction of AVI/Audio/SPD/MS/VS/ACP/ISRC1/ISRC2/Gamut InfoFrames
Full colorimetry support
Support for 8/10/12-bit color depths
Support for RGB 4:4:4, YCbCr 4:4:4, YCbCr 4:2:2 color sampling
Support for up to 8-channel IEC60958/IEC61937 audio streams
Support for extraction of audio formation information and channel status data
Support for extraction of video timing information
Support for extraction of 3D format information
Support for extraction of Sony/Canon DSLR time code
Support for Side-by-Side Half, Top-and-Bottom, Frame Packing 3D mode.

Analog Audio Features

Extract the embedded HDMI audio and output via 3.5mm unbalanced Line out
Capture analog audio via 3.5 mm unbalanced Line In interface

Video Capture Format

Support for capture resolutions up to 20481080 or 19201200
Support for output frame rates up to 60fps. (Actual output frame rate can be limited by the USB bandwidth.
Support for YUY2 4:2:2 8-bit
More capture format can be set using USB Capture Utility

Video Processing Features

Video processing pipelines with 160 Mpixels/s processing bandwidth
Video cropping
Video scaling
Video de-interlacing
Wave
Blend top and bottom field
Top field only
Bottom field only
Video aspect ratio conversion
Auto or manual selection of input aspect ratio
Auto or manual selection of output aspect ratio
Three aspect ratio conversion modes: Ignore (Anamorphic), Cropping or Padding (Letterbox or Pillarbox)
Video color format conversion
Auto or manual selection of input color format and quantization range
Auto or manual selection of output color format, quantization range and saturation range
Support for RGB, YCbCr 601, YCbCr 709, YCbCr 2020 color formats
Support for Limited or Full quantization range
Support for Limited, Full and Extended gamut saturation range
Video frame rate conversion

Multiple devices on one computer

Support for connecting multiple USB devices in one system
Set the device serial number as the device name shown in the system using USB Capture Utility

SDK

USB Capture SDK provide functions including signal status extraction, capture configuration, etc.

Firmware Upgrade

Multiple devices in one system can be upgraded simultaneously

LED Indicator

Status LEDs indicate the working state of each channel: idle, input signal locked, memory failed or FPGA configuration failed.

Form Factor

101.5mm (L) x 56.8mm (W) x 17mm (H)

Power Consumption

5V max current: 600mA
max power consumption:~3W

Working Environment

Operating temperature: 0 to 50 deg C
Storage temperature: -20 to 70 deg C
Relative Humidity: 5% to 90% non-condensing

Requirements

Supported OS

Windows 7/8/8.1/10/2008/2008 R2/2012 (x86 and x64)
Linux (Ubuntu 12.04-16.10, CentOS 7)
OS X 10.9-10.11
macOS 10.12

Supported APIs

Windows
DirectShow
Wave API/DirectSound/WASAPI
Linux
V4L2
ALSA
OS X/macOS
QuickTime
AV Foundation

Supported Software

VLC
VirtualDub
OBS
XSplit
vMix
VidBlaster
Wirecast
Microsoft Media Encoder
Adobe Flash Media Encoder
Any other DirectShow, V4L2, QuickTime, AV Foundation bbased encoding or streaming software

Review

You're reviewing: USB Capture DVI Plus

Compare Products

You have no items to compare.

PAYMENT METHOD