Manufacturer Part Number: XDIP-PSU-US
The AdderLink XDIP is a compact, easy to install, fanless matrix solution that runs on a standard IP network and enables users to extend and manage their computers with ultra-low latency, HD video and stereo audio. The XDIP is scalable, from simple extension to small matrix. It is very well suited to small and medium sized installations.
Uses IP technology over standard CATx network cable Point-to-point, switching, sharing or small matrix operation Local USB and video feed through ports PoE models are powered by PoE or an optional external PSU USB2.0 (low and full speed) for keyboard, mouse, tablet and touch screen Analog audio with headphone support
Configurable unitsThe XDIP user and computer units are the same and assigned a role at set up. They can transmit/receive up to 1920x1200 video, stereo analog audio and USB2.0 over a single CATx network cable.
High quality video, real-time controlXDIP implements low latency, high quality, 60Hz video compression to deliver an at the computer' user experience over a standard Gigabit LAN.
CATx cable for connectionVideo, USB2.0 and audio all pass along a single minimum spec of CAT5e cable allowing use of existing infrastructure cables in the building and an immediate ROI. Distance is linked to the IP standard of 100m with a 40% overhead for safety. Longer distances are achieved by routing through your IP infrastructure.
Feed through and local computer supportVideo and USB feed through ports are available. These enable a local console at the source computer. A local computer is also supported at the user station.
One solution, many usesXDIP nodes can be configured as a simple extender, distributed KVM switch or KVM sharer or any combination up to 8 computers and 8 users (each user does not necessarily need to be connected to the same 8 computers).
EDID managementThe extender has intelligent EDID management to allow the true characteristics of the monitor to be passed back to the computer or alternatively, a fixed EDID can be specified.
Plug and PlayThere is no need for drivers or software to be installed. A simple wizard takes you through setup at the start of life of the product.
CD-quality analog audioCD-quality stereo audio (16-bit sampling at 48kHz) is passed between the local and remote units. Headphones are also supported (16 to 32 Ohms).
All computers with HDMI, USB and analogue audio. Can be interfaced to VGA, DVI and DisplayPort with appropriate adaptors
The system supports resolutions to a maximum of 1920 x 1200 @ 60Hz
Supports USB2.0 HID devices (keyboard, mouse, tablet and touch)
All known operating systems. No drivers required
HDMI, Audio 3.5mm, USB type B, 8p8c Ethernet port
HDMI, Ethernet, 3 x USB type A, Audio 3.5mm
POE 802.3af via Ethernet port or 3 Pin Locking DC jack (Optional: 100-240VAC 50/60Hz, 0.7A, input to power adapter, 12VDC 18W output from power adapter)
Compact case, robust metal construction. 169mm/6.65in (w), 31mm/1.22in (h), 120mm/4.8in (d), 0.6kg/1.3lbs.
0 to 40C / 32 to 104F