Innovative solutions for video editing, motion graphics, and post production.

Connect with Facebook

Beam HD-SDI Video Receiver with Anton Bauer Battery Plates Free Shipping!

Beam HD-SDI Video Receiver with Anton Bauer Battery Plates

More Views

Mfr PN: 10-0579
Our PN: TERN5720074
Manufacturer: Teradek
Platform(s): Mac & Win

Availability: Usually ships in 2-business days or less.

Enter email below:

Similar to Beam HD-SDI Video Receiver with Anton Bauer Battery Plates...

Product NamePrice
Beam HD-SDI TX/RX pair with Anton Bauer Battery Plates$5,290.00
Beam HD-SDI TX/RX Pair with V-mount Battery Plates$5,290.00
Beam HD-SDI Video Receiver with V-Mount Battery Plates$2,790.00


Be the first to review this product

Quick Overview

Beam HD-SDI Video Receiver with Anton Bauer Battery Plates



Manufacturer Part Number: 10-0579

The Teradek Beam is a full HD camera-back H.264 encoder, capable of delivering stunning video at bit rates up to 30Mbps.* Beam operates on the unlicensed 5GHz band and can transmit up to 2500ft with just 2 frames of latency. Whether the job requires a wireless link back to the OB Van or an MPEG-TS stream back to the station, Beam gives broadcasters unparalleled flexibility in the field.

Multicast Capable + IFB
Beam is multicast capable up to 4 receivers and includes a dedicated bidirectional IFB channel, which allows a news operations center to speak directly to the camera operator in the field.

Camera Control
Beam offers a full duplex RS-422 port for remotely controlling your camera.

Protocol Support
Beam utilizes the RTSP and MPEG-TS protocols, allowing broadcasters to transmit video over the Internet to a Beam decoder or directly to computers at very high bit rates. The Beam decoder can also act as an RTSP server, which will re-stream your video feed directly to a local computer.

Functional Design
With a 3G-SDI input and your choice of AB- or V-mount battery plates, Beam seamlessly integrates with all popular professional cameras. The chassis also includes an OLED screen for quick configuration, LAN port for broadcasting over wired networks, and support for high power transmission on the 5.15 ~ 5.25GHz band.


BEAM Specification
Video CompressionH.264 Baseline Profile Level 4.2 with de-interlacing
System Latency90 - 110 millisecond delay between Transmitter and Receiver
Wireless range2500ft +- 200ft
Digital Video In/OutSD-SDI, HD-SDI, 3G-SDI
Video PortTX: SDI input and looped Output, RX: SDI output
Supported Video ResolutionsSMPTE244480i59.94 (NTSC), 480i60 (861-D)
IEC61179-5576i50 (PAL)
SMPTE 296M720p23.98, 720p24, 720p25, 720p29.97, 720p30, 720p50, 720p59.94, 720p60
SMPTE 274M1080i50, 1080i59.94, 1080i60, 1080PsF23.98,1080PsF24, 1080PsF25, 1080PsF29.97, 1080PsF30, 1080p23.98, 1080p24, 1080p25, 1080p29.97, 1080p30, 1080p50, 1080p59.94, 1080p60
SDI ComplianceSMPTE 259M BI.656SDTV Digital Signal/Data Serial Digital Interface
SMPTE 292M BT.11201.5Gb/s Signal/Data Serial Digital Interface
SMPTE 425M3Gb/s Signal/Data Serial Digital Interface
SMPTE 299M16bit Digital Audio Format for SMPTE 292M
SMPTE 352MVideo Payload Identification for Digital Interfaces
BitrateRTSP ServerUp to 30Mbps
MPEG2-TS ServerUp to 15Mbps
Main Digital Audio In/OutTX/RXSDI embedded audio: 48kHz 16-bit stereo linear PCM
Main Analog Audio OutRX48kHz 16-bit stereo linear PCM with mini stereo phone output jack
Talk-Back Analog Audio In/OutRX/TX8kHz 16-bit stereo linear PCM with mini stereo phone input/output jack
Radio PowerAggregate Power: 150mW (22dBm), 50mW (17dBm)/antenna
Radio standardIEEE 802.11a/n: OFDM
FrequenciesU-NII-1 (5.15-5.25 GHz), U-NII-3 (5.725-5.85 GHz)
Antenna3T x 3R MIMO, 3 antennas per WiMi6200TW/W1Mi6200RW
Security802.1x, 802,11i, WPA2, WPA and WEP 64/128 TKIP 128bit AES
WPSWireless Protected Setup for easy set up and security configuration
Ethernet LAN10/100 BASE-TX, RJ-45 jack
MulticastWiFi: Up to 4 Receivers
LAN: No limit on number of receivers
External ControlFull duplex RS422 serial port
USBFactory reset, IP configuration or firmware upgrade without PC
Power Input/ConsumptionDC 7V-17V, 12 Watt
Dimensions (H x W x D) (mm)170 x 105 x 28 each board assembly (TX or RX)
Weight (g)TX: 990g
RX: 610g
Operating Temperature0 deg C to 50 deg C


You're reviewing: Beam HD-SDI Video Receiver with Anton Bauer Battery Plates

Compare Products

You have no items to compare.