Innovative solutions for video editing, motion graphics, and post production.

Magewell Pro Convert

Home Video Converters Magewell Pro Convert HDMI 4K Plus
Standalone HD HDMI to full bandwidth NDI encoder, 1-channel HDMI with loop-through out, POE
MWL-PROCONVERT
Magewell
Mac & Win
Usually ships in 1-2 business days.
Electronic Download
Usually ships in 1-2 business days.
Availability: In stock

As low as $369.00

The Pro The PConvert HDMI TX 1-Channel NDI Encoder from Magewell allows you to convert an HDMI signal with embedded audio to an NDI stream. It supports resolutions up to 2048 x 1200 at 60p on both input and NDI output. The device can be powered via an included power adapter or over PoE using the NDI port. It features a 1/4"-20 thread for camera mounting and can be used in the studio or in the field thanks to a compact and robust design. There's also a PTZ+tally shared mini-DIN port for connecting tally lights or setting up NDI-based PTZ camera control. A tally light accessory comes included.

 

A companion Web UI allows assigning the device name, source name, and other settings. The encoder also has an on-board SD card slot but it is not functional at the time of this writing. Any future firmware updates will also be accessible via the Web UI.

 

The Pro Convert HDMI TX Encoder additionally features an adaptive HDMI equalizer that allows for HDMI cables lengths up to 98'.

 

HDMI Specific Features

165 MHz HDMI receiver

Adaptive HDMI equalizer support for cables lengths up to 98'

Customized EDID support

Extraction of AVI/Audio InfoFrames

Full colorimetry support

Up to 2048 x 1200 4:4:4/4:2:2 60 fps input signals

Support for 8-input and 2-output IEC60958 audio streams

Extraction of audio formation information and channel status data

Extraction of video timing information

Extraction of 3D format information

Side-by-side half, top-and-bottom, and frame packing 3D modes


Convert one channel of HDMI signal with embedded audio to NDI® stream

Input Interface

HDMI

DVI-D 1.0

HDMI 1.4

Storage Interface

SD Card (functions to be developed)

PTZ + TALLY Control

Mini-DIN8 jack

Mounting Hole

20 mounting hole

Network Interface

10/100/1000Mbps Ethernet

IEEE 802.3af PoE

USB Interface

USB2.0 Type B

5V/2.1A power supply

USB RNDIS/ECM

Input feature

Support input video resolutions at up to 2048x1200

HDMI Specific Features

165MHz HDMI receiver

Adaptive HDMI equalizer support for cables lengths up to 30M

Support for customized EDID

Support for extraction of AVI/Audio InfoFrames

Full colorimetry support

Support up to 2048x1200 4:4:4/4:2:2 60fps input signals

Support 8 input and 2 output IEC60958 audio streams

Support for extraction of audio formation information & channel status data

Support for extraction of video timing information

Support for extraction of 3D format information

Support for Side-by-Side Half, Top-and-Bottom, Frame Packing 3D mode.

NDI Output Format

Support for 4:2:2 8-bit output

Support for up to 2048x1200 60fps

Support for NDI 4.1

Video Processing Features

Video processing pipelines with 160 Mpixels/s

Video brightness, contrast, saturation, hue adjustment

Video de-interlacing

Top field only

Bottom field only

Video aspect ratio conversion

Auto or manual selection of output aspect ratio

Video color format conversion

Auto or manual selection of input color format & quantization range

Auto or manual selection of output color format, quantization range & saturation range

Support for RGB, YUV BT.601, YUV BT.709, YUV BT.2020 input color formats

Support for YUV BT.601, YUV BT.709, YUV BT.2020 output color formats

Support for Limited or Full quantization range

Support for Limited, Full & Extended gamut saturation range

Video frame rate conversion

Video mirror flip

NDI Source Name

Support for setting the device name shown in the system using Web UI. By default, the device name is Pro Convert.

Support for setting the source name shown in the system using Web UI. By default, the source name is board-index + serial number.

Support for setting board-index, from 0 to F, through on-board rotary switch

Firmware Upgrade

Support for manual update using Web UI

LED Indicator

Status LEDs indicate:

Power supply indicator: on/off

Input signal indicator: locked/unlocked

Form Factor

100.9smm (L) x 60.2mm (W) x 23.3mm (H)

Accessories

USB 2.0 A to B Cable

5V/2.1A power adaptor

Mini-DIN8 (PTZ + TALLY) to RS232 (PTZ) + Mini-DIN8 (TALLY)

Tally lights

L-bracket

LED matrix panel (optional)

Power Consumption

5V max current: ~1.5A

Max power consumption: ~6W

Working Environment

Operating temperature: 0 to 45 deg C

Storage temperature: 20 to 70 deg C

Relative Humidity: 5% to 90% non-condensing

  • Magewell Pro Convert HDMI TX 1-Channel NDI Encoder
  • 5V, 2.1A Power Adapter
  • USB Type A to Type B Cable
  • Mini-DIN8 to DIN8 + DB9 Cable
  • Tally Light
  • L Bracket
  • Limited 2-Year Warranty

Supported Web Browser (tested)

Microsoft Internet Explorer 11

Microsoft Edge

Mozilla Firefox version 61 and above

Google Chrome version 49 and above

Apple Safari 11.1 and above

Opera 55.0.2994.44 and above

Supported Software (tested)

OBS

XSplit

vMix

VidBlasterX

Wirecast

streamstar SW

mimoLive

Any other NewTek NDI-enabled encoding or streaming software

Reviews

You May Also Be Interested In...