My Cart
You have no items in your shopping cart.
Safe Harbor
Innovative solutions for video editing, motion graphics, and post production.
Description
Details
Manufacturer Part Number: XPRMG3-826URP
Features Xpander Rackmount 8, 5U Gen3
- Front panel LCD status indicator for environmental management
- GPU management software for asset management of GPUs, health monitoring, technical support
- Eight PCIe Gen 3 x16 expansion slots (all supporting both dual-slot and single-slot cards) per system
- Two 4-slot MIBs per 5U in 19' rack mount system
- Multiple cooling fans per MIB to meet almost any expansion requirement (per MIB)
- Each x16 cable and connector provides a 250 mating duty cycle
- Redundant power supply
Benefits Xpander Rackmount 8, 5U Gen3
- Install Grid K2 GPUs for VDI acceleration
- LCDs indicate health of the system, i.e. power supply status, temperature, fan speed and PCIe slot link speed
- At-a-glance read of each of the GPU capabilities i.e. number of GPU cores, amount of RAM, load characteristics, etc.
- Add up to eight powerful NVIDIA GRID K2 GPUs 4 per host computer
- 128Gb/sec theoretical transfer rate
- Add multiple fast-access PCIe flash cards
- No down time if a power supply goes down; simple access and replacement
Specifications
Xpander Rackmount 8 5U Technical Specifications
| Expansion slots | PCI Express Generation 3.0 x16 |
| Number of slots (std) | 4 slots in each of 2 MIBs for a total of 8 slots |
| Form factor support | 8 full-height, full-length controllers or adapters in 2 MIBs |
| Xpander Rackmount 8 5U | Supports 8 NVIDIA GRID K2s |
| Connector duty cycle | 250 mating cycles maximum per connector |
| PCIe x16 HIC | Install in a PCIe x16 slot |
| Front panel LCD | MIB select = left button Main menu = center button Sub-menu = right button |
| Cubix Corporation | MIB assembly and revision; management firmware revision |
| Power supply status | Redundant Power On - Good |
| Temperature status | 3 sensor readouts in degrees Centigrade (C) |
| Fan status | Fan status, voltage percent (%) speed |
| PCIe link status | x16 cable connected; 8.0Gbps, 5.0Gbps or 2.5Gbps x16 link speed |
| x16 cable | Connected or not connected status |
| Slot 1 - 4 x16 transfer rate, theoretical | PCIe Gen 3 is 8.0Gbps x16 = 128.0Gbps PCIe Gen 2 is 5.0Gbps x16 = 80.0Gbps PCIe Gen 1 is 2.5Gbps x16 = 40.0Gbps |
| LCD panel backlight | Toggle on / off using right button |
| Rear panel | Power input receptacles |
| Receptacle 1, right | Controls MIB 1, facing Rackmount 8 rear |
| Receptacle 2, left | Controls MIB 2, facing Rackmount 8 rear |
| Cooling fans | 4 fans run at 112cfm (cubic feet per minute) maximum |
| Xpander power up | Fans are full on for 10s (seconds) |
| Fan speed, minimum | 25C degrees |
| Fan speed, maximum | 50C degrees |
| Fan speed, in range | 25C degrees to 50C degrees in gradual, linear progression |
| Normal operation | D1 LED = 1 pulse of 10ms (millisecond) on for every 700ms off |
| Error indication | D1 LED = 4 pulses of 10ms on for every 700ms off |
| Error conditions | [1] No fan tachometer or [2] no temperature sensor connected |
| AC power supply, 2 MIBs | 1500W Redundant Power Supplies, auto-ranging, 180-264VAC, 15-10Amps, 47-63Hz |
| Operating environment | 0 to 30 Celsius (32 to 86 Fahrenheit) temperature 5% to 80% non-condensing humidity |
| Dimensions of Xpander Rackmount 8 5U | 8.7in H x 16.6in W x 26in D (22.10 cm x 42.16 cm x 66.04 cm) |
| Weight, actual of Xpander Rackmount 8, 5U | 62lbs (28.12kg) |
| Warranty / period | Parts and labor return to manufacturer / 2 year |
| Optional | 3 year warranty |
Review
Compare Products
You have no items to compare.
